A192 Boiler Tubes SA192 Tubes

ASTM A192 specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service.The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements.Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

 

 

 

 

 

 

 

 

A192 Boiler Tubes SA192 Tubes Features-

 

Low-temperature services serve at -45F°F (-45°C) Excellent strength and ductility.
Conductivity than alloy steels.
Higher strength with low coefficients of thermal.
Better weldability and greater toughness.

 

 

Product information of

A210-A1 Seamless Boiler Tube-

 

High temperature seamless carbon boiler steel pipe, smoking pipe, heat exchanger tube
OD:21.3-914.4mm; WT: 4-59.54mm
Grade: astm a179, a192, st35.8
MOQ: 10 tons
7-10 day quick delivery time.

 

 

 

Package

Bundle packing.
Bevelled end or plain end or warnished as per buyer’s required
Marking: As per customer’s requests.
Painting varnish coating on the pipe.
Plastic caps at ends.

 

Supply range

 

Seamless steel pipe
ERW steel pipe
Steel casing
Tubing
Hot-rolled steel pipe
Spiral steel pipe
Hot-galvanized steel pipe

 

 

ASTM A192 specifications-

 

Product name
manufacture a192 reheater boiler seamless tube for sale
 
Type
carbon steel pipe
 
Quality
seamless steel pipe 
 
Usage
boiler tube for smoking pipe, heat exchanger pipe
 
Pipe size
out diameter: 21.3-914.4mm
wall thickness: 4-59.54mm
length: 3-15m, according to customer’s demand
 
Types of pipe end
plain pipe ends, bevel pipe ends or as per customers’ requirement
 
Rust prevention of pipes
black painting, varnish painting, hot dipped galvanized, pe, pp, epoxy coatingor as per customers’ requirement
 
pipe fittings
could be provided under demand
 
Certification
ISO, CE
 
3rd party inspction
SGS, BV, TUV or as per customers’ requirement
 
MOQ
10 Tons
 
Supply ability
3000-4000 ton / month

 

 

 

 

Why Choose us?

 

 

Quick response in quotation, delivery, after-service.

Focus on pipe & tube solution for project application.

Third party inspection is accepted.

 

 

 

Send Enquiry