Monel

Monel 400 Suppliers Exporters

 

Monel 400


Monel 400 suppliers

Industry Names : Monel, Nickel 400, Alloy 400 Material : Exotic Specialty Steel

Specifications : ASTM B127 QQ-N-281 (Plate), ASTM B127 QQ-N-281 (Wire), ASTM B164 QQ-N-281 (Bar), ASTM B165 (Pipe), ASTM B165 (Tube), UNS N04400

Applications : Electrical and Electrical Components, Feed Water and Steam Generator Tubing, Heat Exchangers, Marine Fixtures, Propeller and Pump Shafts, Pumps and Valves, Sulfuric Acid and Hydrofluoric, Tanks, Transfer Piping from Oil Refinery Crude Columns, Valves

Features : Corrosion Resistant in a Variety of Marine and Chemical Environments, Excellent Resistance to Chloride Ion Stress Corrosion Cracking, Good Mechanical Properties from Sub-Zero Temps to 480° C

Monel 400® or Alloy 400 (UNS N04400) is a nickel-copper alloy with superior corrosion resistance, moderate/high strength and good weldability. Monel 400 is resistant to a variety of corrosive conditions such as acidic applications involving hydrofluoric acid, saltwater, sulfuric acid and alkalies. Monel 400 can only be hardened by cold working. Monel 400 is used across many industries especially marine and chemical processing due to it's superior corrosion resistance.

Monel 400 's mechanical properties in sub zero temperatures are excellent. The strength and hardness of Monel 400 increase with only a minor decrease of impact resistance or ductility and can maintain its toughness over a large range of temperatures.

Monel 400 when compared to other higher copper alloys is for the most part more resistant to attack by oxidizing. Those attributes of Alloy 400 make it suitable in a variety of environments, especially in marine environments.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Monel 400 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips. Request a QUOTE NOW


Monel R405


Monel R405 Suppliers Exporters

Industry Names : Monel R405, Alloy 405, Nickel 405

Material : Exotic, Specialty Steel

Specifications : ASTM B127 QQ-N-281 (Sheet), ASTM B164 QQ-N-281 (Bar), UNS N04405

Applications : Fasteners, Meter & Valve Parts, Screw Machine Products

Features : Excellent Resistance to Neutral and Alkaline Salt, Excellent Resistance to Stress Corrosion Cracking in Most Freshwaters, Good Mechinability and is Recommended for Use with Automatic Screw Machines, Resistance to Chloride Induced Stress Corrosion Cracking Resistant to Seawater and Steam at High Temperatures

Monel R405 is the free machining grade of Monel 400. Due to its higher Sulfur content it enhances machinability. The physical properties are almost the exact same but has slightly different range of mechanical properties. Used primarily for screw machine stock Monel R405 is not recommended for many other applications.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Monel R405 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips. Request a QUOTE NOW


Monel K500


Monel K500 Suppliers Exporters

Industry Names : Alloy K500, MONEL, Nickel K-500

Material : Exotic, Specialty Steel

Specifications : AMS 4676, ASTM B865, QQ-N-286, UNS N05500

Applications : Propeller and Pump Shafts, Pumps and Valves

Features : Corrosion Resistance of Monel 400, High Strength Corrosion Fatigue and Erosion Resistance

Monel K500 or Alloy 500 is in the same nickel based family as other Monel Alloys (Monel 400 and Monel R405). Monel K500 is a corrosion resistant alloy similar to Monel 400 but carries with it greater hardness and strength. In addition it's makeup is mostly that of Copper and Nickel. The reason why Monel K500 has increased properties to that of Monel 400/R405 is that it also contains Aluminum and Titanium. Through their strategic addition the alloy's composition strengthens through heating under controlled conditions.

Monel K500 can go into many applications, for instance, cables, chains, fasteners, doctor blades, pulp paper processing, pump shafts in oil and gas and sensor components. Monel 500 comes in round bar, plate and sheet.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Monel K500 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips. Request a QUOTE NOW


Send Enquiry

Contact Info

Call us on +91 79774 35863 (Rakesh Jain) | Email us on info@ispatalloy.com

Address

Head Office : 33/35, Damodar Bhavan, Shop No-2, 1st Paraswadi Lane, V P Road, Mumbai, Maharashtra 400004