Inconel

 

Inconel 600


Inconel 600 Suppliers Exporters

Industry Names : Alloy 600, Inconel 600, Nickel 600, Inco 600Material : Exotic, Specialty Steel

Specifications : AMS 5540, AMS 5665, ASTM B166, UNS N06600

Applications : Titanium Dioxide Plants, Vacuum furnace fixtures

Features : Good Caustic Corrosion Resistance, Virtually immune to chloride stress corrosion cracking

Inconel 600 is a chromium-nickel alloy designed for use at temperatures up to 2000°F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through it's chromium content. Inconel 600 is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both high temperatures and cryogenic temperatures. The nickel content does make this alloy susceptible to attack at elevated temperatures in sulfur bearing atmospheres.

Inconel 600 is available in round bar, plate, tubing, pipe and sheet.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Inconel 600 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips, Filler Wires. Request a QUOTE NOW


Inconel 625


Inconel 625 Suppliers Exporters

Material : Exotic, Specialty Steel

Specifications : AMS 5581, AMS 5599, AMS 5666, ASTM B446

Applications : Titanium Dioxide Plants, Vacuum furnace fixtures

Features : Good Caustic Corrosion Resistance, Oxidation Resistance to 2000°F, Virtually Immune to Chloride Ion Stress Corrosion Cracking

Inconel 625 is an austenitic nickel-base super-alloy with excellent corrosion and oxidation resistance.The solid solution strengthening of columbium and molybdenum in the nickel-chromium matrix gives this alloy excellent strength and toughness. Inconel 625 is non-magnetic and can be used for parts that require both oxidation and corrosion resistance up to 2000 degrees F. Inconel 625 has a wide array of applications but preforms well in marine environments, hot sections of jet engines and corrosive, high temperature chemical processing atmospheres.

The strength of 625 comes from a stiffening effect of the niobium and molybdenum on its nickel-chromium matrix, thus PH treatments aren't required. The combination of these elements in Inconel 625 provides for a superior resistance to a variety of corrosive environments of a rather unusual severity in addition to high temperature effects like oxidation and carburization.

Inconel 625 is an appropriate selection for sea water applications, 625 is also good for mooring cables and propeller blades, motors, utility boats, undersea communication cables, springs, seals and other types of marine applications.

Inconel 625 comes in a variety of shapes including, but not limited to: round bar, plate, sheet, pipe, tubing and coil.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Inconel 625 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips, Filler Wires. Request a QUOTE NOW


Inconel 718


Inconel 718 Suppliers Exporters

Industry Names : Alloy 718, Inco 718, Nickel 718, Inconel Alloy 718

Material : Exotic, Specialty Steel

Specifications : AMS 5562, AMS 5589, AMS 5596, Capable of AMS 5663, UNS N07718

Applications : Gas Turbines, Industrial Fabricated Parts

Features : Exceptionally High Yield, Tensile and Creep Rupture properties @ temps up to 1300 degrees F

Inconel 718 ® is a nickel-chromium, precipitation hardening alloy that can maintain good ductility and high strength up to 1300°F. Inconel 718 has relatively good formability, weldability and excellent cryogenic properties compared to other PH nickel alloys. In addition, this alloy can be readily welded w/out hardening or cracking. Inconel 718 is non-magnetic and has good oxidation and corrosion resistance in aerospace applications.

Inconel 718 per AMS 5662 (capable of) 5663 in round bar. In addition, 718 is offered in plate, sheet, pipe, tube, flat bar and coil.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Inconel 718 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips, Filler Wires. Request a QUOTE NOW


Inconel 800


Inconel 800 Suppliers Exporters

Industry Names : Alloy 800, Inconel 800, Nickel 800, Inconel 800H/HT, Incoloy 800

Material : Exotic, Specialty Steel

Specifications : AMS 5766, ASME SB408, ASTM B407, ASTM B408, ASTM B409, ASTM B775, UNS N08810

Applications : Ammonia Effluent, Coolers Furnace, Components Heat Exchangers, Process Piping

Features : Good Resistance to Oxidation and Carburization at Elevated Temperatures, Moderate Strength

Inconel 800 or Incoloy 800, or perhaps even 800H or 800HT. Inconel 800 goes by many names and carries with it a few variations. Inconel 800 originally developed by Special Metals has been around since the 1950s but back then, Nickel wasn't as widely available and really only used for special cases when producing certain steels. This grade has always been known to contain properties for high temp strength and resistance to carburization, oxidation and other high temp corrosion.

The variations of this grade come in 2 forms, Inconel 800H and Inconel 800HT. The 800 variety has a higher level of Carbon than the straight 800 counterpart which allows for a higher creep. Inconel 800 HT features a restricted elemental structure that is within standard Inconel 800H chemistry but also requires heat treating. The variation of the Carbon, Aluminum and Titanium give the 3 grades of 800, 800H and 800 HT similar properties but not 100% the same, thus the need to split out this group into 3 alloys.

This material is available in round bar, wire, plate, sheet, strip, pipe and tubing.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Inconel 800 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips, Filler Wires. Request a QUOTE NOW


Inconel 825


Inconel 825 Suppliers Exporters

Industry Names : Alloy 825, Inconel 825, Nickel 825, Incoloy 825

Material : Exotic, Specialty Steel

Specifications : ASME SB163, ASTM B163, ASTM B423, ASTM B704, ASTM B705, ASTM B751, BS 3072-3074, BS 3076 (NA16), UNS N08825

Applications : Heat Exchangers, Process Equipment, Pumps, Valves

Features : Excellent Resistance to Pitting, Good Corrosion Resistance

Inconel 825 or Incoloy 825 is a grade that consists mainly of Nickel, Chromium and Iron but also contains Copper, Titanium and Molybdenum. That composition provides excellent resistance to an array of corrosive environments. Between the Molybdenum, the Nickel and Titanium, this alloy gives outstanding resistance to sulfuric and phosphoric acids, it's resistant to pitting and crevice corrosion and with appropriate heat treating it is stable against the sensitization to inter-granular corrosion.

Inconel 825 or Alloy 825 is available in round bar, pipe, tubing, sheet and plate. Inconel 825 is used in oil and gas or petrochemical applications as well as some marine and acidic environments.

ISPAT ALLOYS & TUBE INDUSTRIES specializes in this business and are suppliers, exporters, importers & stockist of Inconel 825 in the FORM of Pipes, Tubes, Sheets, Plates, Flanges, Pipe Fittings, Butt Weld Fittings, Round Bars, Unions, Valves, Wires, Flats, Fasteners, Square Bars, Hex Bars, Circle, Angle, Channel, Rods, Strips, Filler Wires. Request a QUOTE NOW


Send Enquiry

Contact Info

Call us on +91 79774 35863 (Rakesh Jain) | Email us on info@ispatalloy.com

Address

Head Office : 33/35, Damodar Bhavan, Shop No-2, 1st Paraswadi Lane, V P Road, Mumbai, Maharashtra 400004